Sharp UX-5000 User Manual
Page 12
Advertising
<P=002>
3
Push the pressure plate down until it
locks into position.
4
Place a stack of paper in the cassette,
print side up. Make sure the two far
corners of the paper go under the
paper holders as shown.
••
Make sure the stack of paper is not
higher than the tabs at the top of the
paper guide. If it is, remove some of
the paper.
5
Put the cassette back in the fax.
6
If desired, attach a letter or legal
sticker as appropriate to the cassette.
Loading the paper tray
1
Rotate the received document tray
back. Grasp the hand hold on the
original document IN tray as shown,
and open it.
LOADING PAPER
1-8
INSTALLATION
Advertising