Sharp UX-5000 - Manual (Page 60)

<P=003>
5
Press the START key twice.
••
The document will be scanned into
memory, and your fax will go on polling
standby.
To clear a document
Step Press these keys: Comments
1
MEMORY POLL MODE will appear in the
display.
2 Select CLEAR.
3 The document will be cleared.
Polling Security
Polling Security allows you to prevent unauthorized polling of your fax. When this
function is activated, polling will only take place when one of the following conditions
is met:
♦
The fax number of the polling fax machine has been stored in your fax’s list of
permitted fax numbers (called "passcode numbers"). The polling fax must also have
its fax number programmed in itself, as described in "Entering your name and fax
number" in Chapter 2.
♦
A System number has been programmed in the polling fax machine which matches
your fax’s System number or one of your ID numbers.
♦
An ID number has been programmed in the polling fax machine which matches
your fax’s System number.
System and ID numbers are 4-digit numbers which provide you with an alternate
means of giving and receiving polling permission when you don’t want to use fax
numbers. The steps for programming these numbers are described in the following
pages.
Note: System and ID numbers can only be used if the other fax machine is also a Sharp
machine.
Turning Polling Security on and off
Polling Security is turned on or off with Option Setting 8. The procedure is described in
Chapter 5, "Optional Settings".
FUNCTION
9
2
START
START START
POLLING
4-14 SPECIAL FUNCTIONS