Sharp UX-5000 - Manual (Page 35)

UX5000U-BOSD YF <P=001>
Dialing and transmission
Once you have loaded the document and made any desired transmission settings,
you are ready to dial the number of the receiving fax machine and transmit the
document. There are several ways of dialing, and you can select the one which best
suits your needs.
Normal Dialing
With Normal Dialing, you pick up the handset (or press the SPEAKER key) and dial
as you would to make a telephone call. If the receiving machine is set to receive faxes
manually (this means that the receiving party answers your call by picking up the
handset and speaking, and then presses their Start key to begin fax reception), you
can talk with them before sending the fax.
♦
When using Normal Dialing, you do not have to load the document before dialing.
You can also load the document and make transmission settings after completing
Step 2 below.
1
Pick up the handset or press the
SPEAKER key. Listen for the dial tone.
2
Dial the number of the receiving
machine by pressing the number keys.
••
If Option Setting 27 has been set to
"YES" and BILLING CODE DIAL has
been set to "AFTER", press the
REDIAL key after dialing.
1 2 3
4 5 6
7 8 9
0
OPER
ABC
GHI
DEF
JKL MNO
PRS TUV WXY
SPEAKER
or
3
Wait for the connection. Depending
on the setting of the receiving
machine, you will either hear a
facsimile reception tone or the other
person will answer.
••
If the other party answers, ask them to
press their Start key (if you pressed the
SPEAKER key, pick up the handset to
speak with them). This causes the re-
ceiving machine to issue a reception
tone.
Beep
SENDING DOCUMENTS
BASIC OPERATIONS 3-9