Sharp UX-5000 - Manual (Page 31)

<P=005>
Loading the document
Up to 50 pages can be placed in the feeder at one time. The pages will be
automatically fed into the fax starting from the page on the bottom.
♦
If you need to send or copy more than 50 pages, place the additional pages gently
and carefully in the feeder just before the last page is scanned. Do not try to force
them in, as this may cause double-feeding or jamming.
♦
If your document consists of several large or thick pages which must be loaded one
at a time, insert each page into the feeder as the previous page is being scanned.
Insert gently to prevent double-feeding.
1
Adjust the document guides to the
width of your document.
2
Place the document face down on the
document feeder and push it gently
into the machine. The top edge of the
document should enter first.
••
SEND READY will appear in the dis-
play.
••
If desired, press the PRIORITY key to
send the document ahead of other
documents waiting in memory for trans-
mission, and/or the DOCUMENT key
to send the document without reading
it into memory.
3
You can now either make optional
transmission settings as described on
the following page, or dial the other
party as described in the following
section, "Dialing and transmission".
SENDING DOCUMENTS
BASIC OPERATIONS 3-5