Sharp UX-5000 - Manual (Page 83)

UX5000U-OSOS YF <P=001>
5 OPTIONAL SETTINGS
A variety of optional settings are available which you can use to customize your fax to
better suit your needs. The settings are made by pressing the panel keys, and each
setting is described in the list below.
Accessing the settings
Step Press these keys: Comments
1 OPTIONAL SETTING will appear in the display.
2
or
Move through the list of settings by pressing "#"
to move forward, or "
* " to move backward. The
settings will appear in the order listed below.
Press START when the desired setting appears.
Or, you can also go directly to a setting by
entering the number of the setting (do not press
START in this case). If the number is less then
10, enter "0" first.
3
(Example)
When the desired setting appears in the display,
change it appropriately as described below.
4
Press STOP to return to the date and time
display.
FUNCTION
2
4
STOP
START
Settings
Setting 1: FINE RESOLUTION PRIORITY
This sets the default resolution (the resolution used if a setting is not made with the
RESOLUTION key) for transmitting documents. Press "1" (YES) to set it to FINE, or "2" (NO) to
set it to STANDARD.
• Factory setting: "2"
Setting 2: NUMBER OF RINGS AUTO RECEPTION
This sets the number of rings your fax allows before answering an incoming call in AUTO
receive mode. Enter a number from "0" to "9" (if "0" is entered your fax will answer without
ringing).
• Factory setting: "1"
Setting 3: NUMBER OF RINGS MANUAL RECEPTION
This sets your fax to automatically answer a call after a certain number of rings when it is in
manual reception mode. Any number from "0" to "9" can be entered (enter "0" if you don’t want
your fax to answer automatically).
• Factory setting: "0"
STOP
OPTION SETTINGS 5-1