Sharp UX-5000 - Manual (Page 55)

<P=003>
13
(Example)
Enter a full fax number (skip this step if you don’t
want to enter full numbers). Include the area
code (for example "201") if the number is outside
of the calling area of the relay unit, and "1" for a
long distance call. Also include the dial prefix
(such as "9") for an outside line if you are on a
PBX.
14
Press START and go back to Step 13 if you
want to enter another full number.
15
16 Step 3 or
Return to Step 3 to enter another relay group, or
press STOP one or more times until you return
to the date and time display.
Clearing a relay group
To clear a relay group, you need to know the 2-digit number which identifies it. You
can check this by printing out the Relay Group List as described in Chapter 6.
Step Press these keys: Comments
1 RELAY FUNCTION will appear in the display.
2
RELAY GROUP CLEAR will appear in the
display.
3
(Example)
Enter the 2-digit number identifying the group
you want to clear.
4
5 Step 3 or
Return to Step 3 to clear another relay group, or
press STOP one or more times until you return
to the date and time display.
U
RELAY
START
3
1
START
START
0
0
STOP
STOP
1 2 3 4 5
RELAY REQUEST
SPECIAL FUNCTIONS 4-9