Ux5000u-tsdm, Messages and signals, Display messages – Sharp UX-5000 User Manual

Page 99

Advertising
background image

UX5000U-TSDM

DD

<P=001>

MESSAGES AND SIGNALS

Display messages

CHECK XXXX (paper source)

Either or both of the paper sources (the cassette or tray) will
appear in place of "XXXX". This indicates that the paper
source is not properly installed in the machine, or a paper jam
has occurred in that source.

CONF REFUSED

A confidential transmission has been denied because you
entered an incorrect mailbox number for a machine with
mailboxes.

CONF. RX ERROR

Confidential reception was cancelled because the mailbox
number specified by the transmitting machine is not
programmed in your fax.

COVER OPEN

The operation panel is open. Close it.

DRUM LIFE OVER

The drum cartridge must be replaced.

FAX RCVD IN MEMORY

A fax has been received in memory because the toner
cartridge needs replacement, you have run out of printing
paper, or the paper is jammed. The fax will automatically print
out when the problem is fixed.

FUNCTION MODE

The FUNCTION key has been pressed.

LINE ERROR

Transmission or reception was not successful. Press STOP to
clear the message, and then try again.

MEMORY FULL

The memory is full. See "Dual access" in "Sending
Documents" in Chapter 3.

NO CONF. FUNC

Confidential transmission was cancelled because the receiving
machine does not have a confidential function, a confidential
passcode is not programmed in it, its memory is full, or it is not
a Sharp model.

NO PAPER

This message will be followed by one of the paper sources in
parentheses, and informs you that the paper source is out of
paper. If no paper source is indicated, both paper sources are
out of paper.

NO RELAY FUNC

A relay request has been denied because the other machine
does not have a relay broadcast function, its memory is full, or
it is not a Sharp machine.

TROUBLESHOOTING

8-3

Advertising