Sharp UX-5000 - Manual (Page 68)

<P=006>
13
14 Load the document
15 The document will be scanned into memory.
START
START
Canceling a timer operation
If you need to cancel a timer operation before it is performed, use the procedure
shown below.
♦
You need to know the number assigned to the operation in order to cancel it. If you
don’t remember the number (it appears in the display when you set the operation),
print out the Timer List (see Chapter 6, "Printing Out Reports and Lists").
Step Press these keys: Comments
1 TIMER MODE will appear in the display.
2 Select CLEAR.
3
(Example)
Enter the 2-digit number assigned to the
operation.
4
5
Press STOP one or more times until you return
to the date and time display.
T
TIMER
2
0 1
START
STOP
TIMER OPERATIONS
4-22 SPECIAL FUNCTIONS