Sharp UX-5000 - Manual (Page 72)

<P=002>
8 (Example) Enter the minute (2 digits - "00" to "59").
9 or Press "
*
" to select A.M., or "#" to select P.M.
10
(Example)
Enter the day of the week by entering the
appropriate code number (see above table).
(Skip this step if the operation will be done within
24 hours of pressing the Program Key.)
11
12
Press the "#" key or "
*
" key until the desired
operation appears in the display. The operations
will appear in the following order:
•
Transmission
•
Confidential transmission
•
Polling
•
Serial Polling
•
Broadcasting
•
Relay Request
•
Batch transmission (this will only appear
if a timer setting was made)
•
Memory Polling (this will not appear
if a timer setting was made)
13
Continue with the specific procedure for your
operation (see the following pages).
START
1 5
4
START
Transmission
(Continued from "Initial procedure".)
14
(Example)
Enter the fax number of the receiving machine
using one of the following methods:
•
Press a Rapid Key.
•
Press SPEED DIAL and enter a Speed
number. (If you enter less than 3 digits,
press START to complete the
entry.)
•
Enter a full number.
15
16
Adjust the resolution and contrast if desired
(otherwise skip this step).
START
RESOLUTION
Q
CONTRAST
A
1
ENTERING AND USING PROGRAMS
4-26 SPECIAL FUNCTIONS