Sharp UX-5000 User Manual
Page 85
<P=003>
Setting 11: MEMORY SCANNING
Press "2" (REDUCE) to have the fax reduce the size of documents wider than 8.9" (226 mm)
when it scans them into memory for transmission operations. If "1" (1:1) is pressed, the
document will be stored at actual size, and if the receiving machine only uses 8.3" (210 mm)
paper, the parts outside of that width will not be printed.
•
Factory setting: "2"
Setting 12: COPY SCANNING
This sets the amount by which copies are reduced before printing to ensure that data on the
edges is not cut off. Enter a number from "1" to "5" as follows:
"
1
":
Automatic reduction depending on the size of the original
and the printing paper.
"
2
":
No reduction.
"
3
":
Slight reduction of letter originals. (Letter originals are
reduced slightly to ensure that data on the edges is not cut
off.)
"
4
":
Reduction of A4 size originals to letter size.
"
5
":
Reduction of legal size originals to letter size.
•
Factory setting: "2"
Setting 13: COPY CUT-OFF
Press "1" (CONTINUE) to have documents longer than the printing paper be continued on a
second page when copied. Press "2" (CUT-OFF) to have the part outside that length not printed.
•
Factory setting: "2"
Setting 14: RECEIVE REDUCE
This sets the amount by which received documents are reduced before printing to ensure that
data on the edges is not cut off. Enter a number from "1" to "5" as follows:
"
1
":
Automatic reduction depending on the size of the original
and the printing paper.
"
2
":
No reduction.
"
3
":
Slight reduction of letter originals. (Letter originals are
reduced slightly to ensure that data on the edges is not cut
off.)
"
4
":
Reduction of A4 size originals to letter size.
"
5
":
Reduction of legal size originals to letter size.
•
Factory setting: "1"
Setting 15: IMAGE MEMORY PRINT
Press "1" (YES) to have part of the first page transmitted printed when a Transaction Report is
printed out. Press "2" (NO) to turn the function off. This is only effective when transmitting from
memory.
•
Factory setting: "1"
OPTIONAL SETTINGS
OPTION SETTINGS
5-3