Sharp UX-5000 - Manual (Page 20)

UX5000U-IPSD YF <P=001>
SETTING THE DATE AND TIME
The date and time appear in the display, on reports, at the top of each page you
transmit, and are also used for timer operations. Set the date and time by pressing the
keys on the operation panel as shown below.
♦
To correct a mistake, press the STOP key to move the cursor back to the mistake,
and then enter the correct number.
Step Press these keys: Comments
1 ENTRY MODE will appear in the display.
2
DATE & TIME SET MODE will appear in the
display.
3
(Example: January)
Enter the month (2 digits: "01" for January, "02"
for February, "12" for December, etc.).
4
(Example: the 5th)
Enter the day of the month (2 digits: "01" to "31").
5
(Example: 1999)
Enter the last two digits of the year.
6
(Example: 10:25)
Enter a 2-digit number for the hour ("01" to "12")
and a 2-digit number for the minute ("00" to "59").
7 or Press " * " to select A.M., or "#" to select P.M.
8 The clock will now start.
FUNCTION
3
START
4
0 1
0 5
1 0 2 5
9 9
2-6 INITIAL SETTINGS