Sharp UX-5000 - Manual (Page 82)

UX5000U-IPDR DD <P=001>
DISTINCTIVE RING
Distinctive ring is a service offered by some local telephone companies which allows
you to use up to four different telephone numbers, each with a different ring pattern,
on your regular single line. If you subscribe to a distinctive ring service you can set
your fax to automatically answer when it detects one of those ring patterns, thereby
allowing you to use the number corresponding to that pattern as an exclusive fax
number.
Important:
••
To use distinctive ring, you must subscribe to a distinctive ring service from your local phone
company. Do not make this setting if you do not subscribe to a distinctive ring service.
••
Your fax may not be compatible with some distinctive ring services.
If this feature is turned on, your fax will automatically answer and begin reception after
one ring when your designated fax number is dialed. Note that other devices on the
same line will also ring until your fax answers. If one of your other numbers is dialed,
the fax will ring; however, it will not answer.
To use distinctive ring, you must set Option Setting 29 to the desired ring pattern for
your fax. The procedure for accessing Option Setting 29 is described in Chapter 5,
"Optional Settings". When you have accessed Option Setting 29, set the desired
pattern by entering a number from "1" to "5" as shown below.
1 . RING PATTERN 1: Two short rings.
2 . RING PATTERN 2: One short, one long, and one short ring.
3 . RING PATTERN 3: Two short rings and one long ring.
4 . STANDARD RING: Your standard (normal) ring pattern.
5 . OFF SETTING: Answer all ring patterns (this turns distinctive ring off).
Your fax has been set to "5" at the factory.
4-36 SPECIAL FUNCTIONS