Sharp UX-5000 - Manual (Page 15)

UX5000U-IPOP AY <P=001>
CHANGEOVER
LINE-STATUS RESOLUTION
IN USE STANDARD
FINE
SUPER FINE
HALF TONE
2 INITIAL SETTINGS
A LOOK AT THE OPERATION PANEL
Before you can begin using your fax machine, there is some information that must be
set using the keys on the operation panel. First take a moment to familiarize yourself
with the operation panel, and then set the information as explained on the following
pages.
Paper out indicator
This blinks when one of the
paper sources (cassette or
tray) is out of paper, and lights
steadily when all sources are
out of paper.
Toner cartridge indicator
This blinks when toner nears
empty, and lights steadily
when the toner/developer
cartridge needs replacement.
Drum cartridge indicator
This blinks when the drum
cartridge nears the end of its
life, and lights steadily when the
drum cartridge needs
replacement.
Service indicator
This lights when a
problem occurs which
must be fixed by a
service engineer.
Display
This displays various
messages during operation
and programming.
LINE STATUS light
This lights when the fax
machine is using the
telephone line.
CHANGEOVER key
Two types of information appear in the
display: prompts related to operations
you are performing, and information
about how the fax is using the telephone
line (transmitting, receiving, etc.). Press
this key to switch between the two types
of information.
RESOLUTION key
Press this key to adjust
the resolution before
sending or copying a
document.
INITIAL SETTINGS 2-1