3 basic operations, Ux5000u-bops, Sending documents – Sharp UX-5000 User Manual

Page 27: Transmittable documents, Size and weight

Advertising
background image

UX5000U-BOPS

AY

<P=001>

5.8"

(

148 mm

)

11.0"

(280 mm)

14 lbs.

36 lbs.

3 BASIC OPERATIONS

SENDING DOCUMENTS

Transmittable documents

Your fax can transmit most standard office documents. Specific guidelines are as
follows:

Size and weight

The size and weight of documents which you can load in the document feeder depend
on whether you load one sheet at a time or several sheets at once.

One sheet at a time:

Several sheets at once:

Note:

The area of the document which is scanned by the fax is slightly smaller than the actual
document size. Any letters or graphics outside this area cannot be transmitted.

Scanning width:

8.5" (216 mm) for documents up to 8.9" (226 mm) wide.
Maximum of 10.1" (256 mm) for documents 8.9" (226 mm)
to 11" (280 mm) wide when reduced automatically (see
following note).

Scanning length:

The length of the sheet minus 0.16" (4 mm) from both the
top and bottom edges.

Note:

When sending a document wider than 8.9" (226 mm), your fax will automatically reduce
the width of the image transmitted to 8.0" (203 mm). If the document contains fine print
or graphics, the copy which the receiving party obtains may be difficult to read due to
the size reduction. This function is automatically disabled if the printing width of the
receiving machine is greater than or equal to the width of the document.

5.0"

(128 mm)

17.0"

(432 mm)

(52 g/m

2

)

(157 g/m

2

)

5.8"

(

148 mm

)

11"

(280 mm)

5.0"

(128 mm)

14.3"

(364 mm)

(80 g/m

2

)

14 lbs.

20 lbs.

(52 g/m

2

)

BASIC OPERATIONS

3-1

Advertising