Sharp UX-5000 - Manual (Page 28)

<P=002>
Other restrictions
♦
Documents written in yellow, greenish yellow, or light blue ink cannot be transmit-
ted, as the scanner does not recognize these colors.
♦
Ink, glue, and correcting fluid on documents must be dry before they pass through
the document feeder.
♦
All clips, staples, and pins must be removed from documents before transmission. If
these are not removed, they may damage the fax.
♦
Patched or taped documents should be copied on a copy machine, and the copy
used for transmission.
Dual access
The UX-5000 features full dual access, which means that you can load a document
and dial even when the fax is occupied with another operation. After you dial (when
you use automatic dialing), your document will be immediately scanned into memory
and then transmitted once all previously set operations have been completed.
If more than one document has been scanned into memory for transmission, the
documents will be transmitted in the order in which they were scanned. If you have an
urgent transmission and do not want to wait until previously scanned documents are
transmitted, you can press the PRIORITY key after loading your document. Your
document will be transmitted immediately after the current document has completed
transmission.
If you don’t want the document to be transmitted from memory, you can press the
DOCUMENT key after loading the document. In this case, the document will not be
scanned until the fax completes all previously set operations and the connection to the
receiving party is made. (To transmit the document ahead of any documents waiting in
memory for transmission, press the PRIORITY key.)
The UX-5000 can hold approximately 50 pages of average content in memory. Less
pages can be held if any were scanned using fine or halftone resolution.
♦
The amount of memory currently occupied appears as a percentage ("M:00%") in
the display.
SENDING DOCUMENTS
3-2 BASIC OPERATIONS