Sharp UX-5000 - Manual (Page 51)

<P=003>
Programming the confidential passcode
To receive a confidential document, you must first program a 2-digit mailbox number
and a 4-digit passcode.
Step Press these keys: Comments
1 "CONF. FUNCTION" will appear in the display.
2 "CONF. CODE SET" will appear in the display.
3
(Example)
Enter a 2-digit number ("00" to "99") by pressing
the numeric keys. This number identifies the
mailbox.
4
(Example)
Enter the 4-digit passcode with the numeric keys.
5
6
(Example)
Enter a name for the mailbox by pressing the
letter entry keys as described in "Entering
Letters for Names" in Chapter 2.
7
Note: After entering the passcode, your fax will print it out for your records. If you forget the
passcode and have kept no record, contact your Sharp dealer.
S
CONFIDENTIAL
1 2 3 4
3
1 3
START
Clearing the passcode
Step Press these keys: Comments
1 "CONF. FUNCTION" will appear in the display.
2
"CONF. CODE CLEAR" will appear in the
display.
S
CONFIDENTIAL
4
S H
…
P
START
CONFIDENTIAL OPERATIONS
SPECIAL FUNCTIONS 4-5