Sharp UX-5000 - Manual (Page 79)

UX5000U-SFDC YF <P=001>
DEPARTMENT CONTROL
Department Control is used to limit the use of the fax to authorized personnel. When it
is activated, a department code must be entered before an operation can be
performed with the fax.
Department Control can only be activated by Sharp dealer service. If you want to use
this function, contact your dealer.
♦
Department Control allows you to track the number of pages transmitted as well as
the transmission time for each authorized department or person. See "Department
Usage List" in Chapter 6.
Entering Department Codes
Up to 30 different Department Codes can be entered to allow access to the machine.
Transmitted pages and transmission time will be kept track of separately for each
code. After you enter a code, inform the appropriate group or individual.
♦
A name must be entered for each code. Only the name, not the code, will appear
on the Department Usage List.
♦
Be sure to keep a record of each code and name. If you misplace the record, con-
tact your dealer.
Step Press these keys: Comments
1 "ENTRY MODE" will appear in the display.
2 "DEPT. CODE MODE" will appear in the display.
3 or
Press "1" to set a Department Code, or "2" to
clear a Department Code.
4
(Example)
Entering: Enter a 2-digit number with the
numeric keys. This number identifies the
Department Code you will enter in the next step.
Clearing: Enter the 2-digit number which
identifies the Department Code you want to clear.
5
(Example)
Entering: Enter a Department Code (4 digits or
the number of digits set by Option Setting 28).
Clearing: Enter the Department Code you want
to clear, and go to Step 8.
6
FUNCTION
3
1
1
1 0 1 0
8
START
0
2
SPECIAL FUNCTIONS 4-33