Sharp UX-5000 - Manual (Page 61)

<P=004>
Storing and clearing fax numbers for polling permission
You can store up to 10 fax numbers in your fax’s list of permitted numbers.
Step Press these keys: Comments
1 ENTRY MODE will appear in the display.
2 PASSCODE # MODE will appear in the display.
3 or
Press "1" to set a number, or "2" to clear a
number.
4
(Example)
Storing: Enter a 2-digit number (from 01 to 10).
This number identifies the fax number you will
enter in the next step.
Clearing: Enter the 2-digit number which
identifies the fax number you want to clear, and
go to Step 6.
5
(Example)
Enter the fax number (max. 20 digits).
6
7 Step 4 or
Return to Step 4 to enter another number, or
press STOP one or more times until you return
to the date and time display.
Programming and clearing a System number
One 4-digit System number can be programmed in your fax for giving and receiving
polling permission. Polling will take place if your System number matches the other
fax’s System number or one of its ID numbers.
Step Press these keys: Comments
1 ENTRY MODE will appear in the display.
2 SYSTEM # MODE will appear in the display.
3 or
Press "1" to program the System number, or "2"
to clear it.
If you pressed "2", go to Step 5.
FUNCTION
2
1
3 4
1 0
START
3
5 5 5 1 2
STOP
1
FUNCTION
3
6
2
2
POLLING
SPECIAL FUNCTIONS 4-15