Sharp UX-5000 User Manual
Page 22
…
…
<P=002>
Step
Press these keys:
Comments
1
"ENTRY MODE" will appear in the display.
2
"FAX/TEL # MODE" will appear in the display.
3
Select SET.
4
(Example)
To store a Rapid Key number, press a Rapid
Key (to select Rapid Keys 33 through 48, flip the
Rapid Key overlay up).
To store a Speed Dial number, press SPEED
DIAL and then press up to 3 numeric keys ("1"
to "100"). (If you press less than 3 numeric keys,
press START to complete the entry.)
5
(Example)
Enter the fax number (max. of 34 digits including
pauses) using the numeric keys.
6
7
(Example)
Enter the name of the location or party by
pressing the letter entry keys as described in
"Entering Letters for Names" in this chapter
(max. of 20 characters). If you don’t want to
enter a name, skip this step.
8
9
or
Press "1" if you want to specify the number as a
Chain Dialing number (see the beginning of this
section). Otherwise, press "2" or START.
If you pressed "1" or are storing a Speed Dial
number, go to Step 14. (Note: If you specify a
Rapid Key number as a Chain Dial number, you
cannot enter a back-up fax number.)
10
(Example)
Enter a full back-up fax number.
If you don’t want to enter a back-up number, go
to Step 13.
11
START
5
4
5
4
S
H
…
P
START
FUNCTION
5
4
0
3
1
1
A
1
1
2
START
STORING NUMBERS FOR AUTOMATIC DIALING
2-8
INITIAL SETTINGS