Sharp UX-5000 - Manual (Page 57)

<P=005>
Relay Broadcast
Your fax can also act as a relay station. It will receive a document from a fax machine
making a relay request, and automatically broadcast it to the stations which the
requesting machine specifies.
In order for a fax machine to make a relay request, you must first give it permission by
storing its fax number in the Relay Passcode List. Follow the steps below to store or
clear a fax number.
♦
When your fax receives a relay request from another fax machine, RCVD RELAY
REQUEST will appear in the display.
♦
If the telephone billing function is turned on, the fax cannot act as a relay station.
♦
To clear a fax number from the Relay Passcode List, you need to know the 2-digit
number which identifies it. You can check this by printing out the Passcode List
(see Chapter 6).
Step Press these keys: Comments
1 RELAY FUNCTION will appear in the display.
2 RELAY PASSCODE will appear in the display.
3 or
Press "1" to store a number, or "2" to clear a
number.
4
(Example)
Storing: Enter a 2-digit number ("01" to "10").
This identifies the fax number you will enter in
the next step.
Clearing: Enter the 2-digit number which
identifies the fax number you want to clear, and
go to Step 6.
5
(Example)
Enter the fax number of the machine to be
stored in the list (max. 20 digits).
6
7 Step 4 or
Return to Step 4 to enter another number, or
press STOP one or more times until you return
to the date and time display.
U
RELAY
START
4
0 1
1
STOP
2
0 1 2 3 4 5
RELAY REQUEST
SPECIAL FUNCTIONS 4-11