Sharp UX-5000 - Manual (Page 37)

<P=003>
Speed Dialing
If the number you want to dial has been stored as a Speed Dial number, you can dial
it by pressing the SPEED DIAL key and then entering the Speed Dial number (see
"Storing Numbers for Automatic Dialing" in Chapter 2).
1
Press the SPEED DIAL key and then
enter the Speed Dial number by
pressing the numeric keys.
••
If you enter less than 3 digits for the
Speed Dial number, press the START
key to complete the entry.
2
Check the display. If the name or
number shown is correct, press the
START key. (If not, press the STOP
key and then repeat Step 1.)
START
SPEED DIAL
1 2 3
4 5 6
7 8 9
0
OPER
ABC
GHI
DEF
JKL MNO
PRS TUV WXY
Chain Dialing
An automatic dialing number set for Chain Dialing (see "Storing Numbers for
Automatic Dialing" in Chapter 2) can be combined with another automatic dialing
number or digits entered manually with the numeric keys to dial one phone number up
to 50 digits long. The following are some examples of how this can be done:
♦
Press appropriate Rapid Keys in the proper order. For example, press Rapid Key
01, then Rapid Key 02.
♦
Press a Rapid Key and then manually enter a number by pressing appropriate nu-
meric keys. Press the START key after the final numeric key to begin transmission.
(Use this method, for example, when you have stored a long distance access code
into a Rapid Key, and want to dial this in combination with a number which hasn’t
been stored as an automatic dialing number.)
SENDING DOCUMENTS
BASIC OPERATIONS 3-11