Schneider Electric Communication Drivers User Manual
Page 104
ISAWAY driver
104
4
Click on Change Settings.
Result
The following window appears:
5
From the Value list, select the non-conflicting address range.
Note: note the values because they must be coded onto the ISA card.
6
Confirm using the Ok button.
7
Carry out steps 5 to 8 selecting Interrupt Request from the list.
8
Confirm with OK then restart the station with the card connected.
Step
Action
To modify Input/Output Range
Enter the Input/Output range that you wish to configure for
this device.
You can either enter a specific range and the closest valid
range will be automatically selected, or select a range using
the arrow keys.
?
No devices are conflicting.
Value:
The setting you have chosen does not conflict with
any other devices.
01A0-001AF
OK
Cancel
Conflict information