Schneider Electric Communication Drivers - Manual (Page 94)

ISAWAY driver
94
Click the Datagram tab to display the following window:
The table below describes the different areas:
Area Description
Input/Output
buffer
Allows the size of the buffers for the interface between the PCX57 card
and the driver to be configured. The size may be set at between 160
and 256 bytes.
Default Allows default selection of the card (256 bytes)
Cancel Cancels a modification, and returns to the previous screen.
OK Validates the configuration; the parameters displayed are stored and
the previous screen is displayed.
[2] PCX57 Configuration
Hardware Datagram
Input/Output Buffers
Default
OK Cancel
256 Bytes Size (bytes)