Schneider Electric Communication Drivers User Manual
Page 93
ISAWAY driver
93
Properties
Press the Properties button to display the following window:
The table below describes the different areas:
Area
Description
I/O Base
This is the address of the PCX57 card in hexadecimal, which should
correspond to the address configured on the processor card
Timer(ms)
Represents the watchdog refreshment period, which is updated by the
driver.
Default
Displays the default configuration of the card (IRQ=10, I/O
Base=H’220’, Timer=500ms).
Cancel
Cancels a modification, and returns to the previous screen.
OK
Validates the configuration; the parameters displayed are stored and
the previous screen is displayed.
I/O Base
[2] PCX57 Configuration
Hardware
Datagram
0x0220
Timer (ms)
500
IRQ Level
IRQ10
IRQ11
IRQ5
IRQ3
IRQ15
Default
OK
Cancel