Schneider Electric Communication Drivers - Manual (Page 25)

Serial port
25
How to modify a
profile From the driver configuration screen.
How to remove a
profile From the driver configuration screen.
How to activate a
profile From the driver configuration screen.
Step Action
1 Select a configuration profile from the list.
Result: the cursor moves to the selected line.
2 Click on the Modifier button; see Uni-Telway parameters, p. 21.
3 Modify the parameters according to the remote device.
4 Select the Line parameters (See Line parameters, p. 22) tab and modify the
transmission parameters according to the remote device (speed, parity, data,
etc.).
5 If the driver requires specific configuration, click on the Advanced (See
Advanced parameters, p. 23) tab and modify the parameters according to the
remote device.
6 Accept the configuration by clicking on Ok .
Result: the new configuration appears in the list.
Step Action
1 Select a configuration profile from the list.
Result: the cursor moves to the selected line.
2 Click on Delete.
3 Press the Yes button to confirm your choice.
Result: the configuration is removed from the list.
Step Action
1 Select a profile from the list.
Result: the cursor moves to the selected line.
2 Click on the Apply button.