Schneider Electric Communication Drivers - Manual (Page 40)

TSX FPP 20 card
40
How to install the driver
At a Glance The configuration tool is used to configure the driver in Fipway or Fipio mode to use
the TSX FPP 20 card.
Illustration The screen dedicated to the card driver looks like this:
Description This table describes the different areas which make up the configuration screen:
Network Parameters
OK Annuler
TSXFPP20 Configuration
63
Network :
Station :
Network Type
Fipway
Fipio
Fipway (World FIP)
Fipio (WORLD FIP)
Appliquer
0 1
2
3
Number Element
1 This field is used to set the network address.
2 This field is used to set the station address.
3 This window is used to select the type of Fipway or Fipio connection.