Schneider Electric Communication Drivers - Manual (Page 20)

Serial port
20
Driver configuration screens
At a Glance The configuration tool is used to link a driver configuration profile to a remote device
that communicates with the station.
Illustration The screen dedicated to the Uni-Telway driver looks like this:
Description This table describes the different areas which make up the configuration screen:
OK
Uni-Telway Configuration
Station ID
Target Station:
Cancel Apply
[Default]
Add Modify Delete
Remote Password Ph
Station List
[Default] COM 1
1
2
3
4
5
6
7
Number Element
1 This field is used to display the active profile.
2 This list is used to display the driver profile associated with each remote device.
3 These buttons are used to select the driver profile.
4 This button is used to add new profiles to the list.
5 This button is used to modify the profile of the driver selected from the list.
6 This button is used to remove a profile from the list.
7 This button is used to make the profile selected with the cursor active.