Schneider Electric Communication Drivers - Manual (Page 33)

TSX SCP 114 card
33
Configuration of the Windows 2000\XP operating system
At a Glance After the driver installation and configuration phase, the operating system shall
recognize the TSX SCP 114 card and its driver.
How to configure
the operating
system The following procedure describes how to configure the operating system:
Note: When configuring the system, it is not necessary to restart the station.
Step Action
1 Install and configure the driver.
2 Insert the PCMCIA card into its slot.
Result:
The system automatically detects the card and loads the card driver.