Schneider Electric Communication Drivers - Manual (Page 82)

Installation
82
How to configure the driver
At a Glance During driver installation, a default configuration profile is proposed. You are able to
modify this profile or create a new one.
How to create a
new profile From the driver configuration screen,
How to remove a
profile From the driver configuration screen,
Note: If all the network connections are in use or if there are none on the station,
a profile cannot be created.
Step Action
1 Select the menu Configuration
→
Create a profile.
Result
The following window appears:
2 From the TCP/IP drop-down menu, select the TCP/IP connection to the
network.
3 Click Ok .
Creation of a new XIP profile
XIP01
OK
Cancel
ADAPTER01(139.160.67.39)
XIP XIP/IP
Step Action
1 Select the menu Configuration → Create a profile.
2 From the drop-down menu, select the profile to be removed.
3 Confirm deletion with Ok .