Schneider Electric Communication Drivers - Manual (Page 71)

Installation
71
How to install the driver for Windows NT
At a Glance The ETHWAY protocol is installed from:
l from the drivers’ CD-ROM,
l or from disks if the station has no CD-ROM drive.
How to create a
set of disks Use the following procedure to create installation disks:
Note: The installation disks are created from the CD-ROM.
Step Action
1 Use a station which has a CD-ROM drive.
2 Insert the CD-ROM into the drive.
3 Access the directory of the driver to be copied onto disk.
4 Copy the contents of the DISK1 directory onto a disk. Repeat step for each
DISK directory.
Note: it is advisable to number the disks.