Schneider Electric Communication Drivers User Manual
Page 146
Functions
146
Other tabs
The windows corresponding to these tabs are described in the description of the
configuration for each driver:
l
for the Uni-Telway driver tab:
l
if using a serial port see Driver configuration screens, p. 20,
l
if using a TSXSCP114 card see Driver configuration screens, p. 30,
l
for the FPC10 driver tab see Driver configuration screen for Windows NT, p. 48,
l
for the FPP20 driver tab see How to install the driver, p. 40,
l
for the XIP Driver see Driver configuration screen, p. 80,
l
for the PCX 57 Driver tab:
l
when using Windows NT see Configuration of the ISAWAY driver for Windows
NT, p. 90,
l
when using Windows 98\2000\XP see Configuration of ISAWAY driver for
Windows 98\2000\XP, p. 95,
l
for the PCI 57 driver tab see Configuring the PCIWAY driver for windows
2000\XP, p. 114,
l
for the USB Driver tab see State of the USB link, p. 139.
Master Path : DM
If Modbus Plus protocol is being used, then the station address is
shown here.
Request Group
Field
Description
Request
Status
Status of connection, "disconnected", " connecting... " or "connected".
Command buttons
Object
Description
Connect
Opens an internal communication channel on the selected driver.
Launch
Launch request transmission to the station defined in the Remote IP
address field of the Link Parameters group.
Concerning
Displays X-Way Manager version and copyright details.
Link Parameters Group
Field
Description