Schneider Electric Communication Drivers - Manual (Page 152)

TSXPCX3030
152
3 Choose the Automatic driver search option and click on Next.
Result: The following window is displayed:
4 Before selecting the CDROM drive option, insert the CDROM Drivers in the CDROM drive.
Or
if you have copied the content of the CD-ROM in a specific location, select the Specific location
option and indicate the location of the driver.
5 Click on Next.
Result: the bus driver has been found.
6 Click on Next.
Result: a window indicates that the installation has been successfully completed.
7 Click on Finish.
Result: a new window appears for installing the serial port driver.
8 Click on Next.
Result: the New hardware search assistant window appears.
9 Choose the Automatic driver search option and click on Next.
10 Before selecting the CDROM drive option, insert the CDROM Drivers in the CDROM drive.
Or
if you have copied the content of the CD-ROM in a specific location, select the Specific location
option and indicate the location of the driver.
11 Click on Next.
Result: the bus driver has been found.
Step Action
Optional search locations:
The Assistant is searching for adapted pilots in the pilot database on your computer, as
well as in the location indicated by you above should you wish
Where do you want Windows to search for the pilot files?
Search for pilot files for the following hardware peripheral:
Serial < - > USB
Searching for pilot files
Hardware Assistant detected
To start the search, click on Next. If you carry out the search on a disk or CD-ROM drive,
insert the disk or CD-ROM before clicking on Next.
Disk drive
CD-ROM drive
Specific location
Microsoft Windows Update
Next > < Previous Cancel