Schneider Electric Communication Drivers User Manual
Page 151
TSXPCX3030
151
Installation
The following table describes the procedure to install both drivers required to use the
TSX PCX 3030 cable.
Step
Action
1
Connect the cable to the USB port of your device.
Result: Windows detects the new hardware and displays the assistant for installing the hardware
driver.
2
Click on Next.
Result: The following window is displayed:
What task do you wish the Assistant to carry out?
Find a pilot adapted to my peripheral (recommended)
Display a list of known pilots for this peripheral, in order to choose a specific
pilot.
Next >
< Previous
Cancel
A peripheral pilot is a software program that enables the operation of a hardware
peripheral. Windows requires pilot files for your new peripheral. Click on Next to find
the pilot files and finish.
A peripheral pilot is a program that enables a hardware peripheral to be used by
an operating system.
The assistant will complete the installation of this peripheral:
USB Device
Installation of peripheral pilots:
Hardware Assistant detected
"
"