Schneider Electric Communication Drivers - Manual (Page 84)

Installation
84
How to remove a
connection From the configuration screen,
How to modify a
connection From the configuration screen,
XIP Instances Once installed, configure the XIP driver and reboot the computer. All XIP profile
instances are initialized.
For each XIP profile configured a corresponding icon appears in the task bar.
Step Action
1 In the Connections installed window, select the name of the remote station
to be removed.
2 Click Delete.
3 Click Save.
Note: the configuration is saved for the current profile.
Step Action
1 In the Installed Connections window, select the name of the remote station
to be modified.
2 In the New connection window, modify:
l the name of the remote station or bridge,
l the address of the remote station or bridge,
l the IP address of the remote station or bridge,
3 Click Update.
4 Click Save.
Note: the configuration is saved for the current profile.