Schneider Electric Communication Drivers - Manual (Page 61)

TSX FPC 10 ISA card
61
5 Click on Change settings.
Result
The following window appears:
6 From the Value list, select the non-conflicting address range.
Note: note the values because they must be coded onto the ISA card.
7 Confirm with OK.
Result: a confirmation window appears.
8 Confirm with Yes.
9 Carry out steps 4 to 8 selecting Interrupt Request from the list.
Step Action
Modify input/output range
Enter the input/output range you wish to define for this
peripheral.
You can either enter a specific range and the closest valid range
will be automatically selected, or select a range using the upper or
lower indicator arrows.
This resource is assigned to the following child peripherals:
Value:
The parameter you have chosen is not in conflict with other
peripherals.
OK Cancel
?
0210-021F
Information concerning conflicts
No peripherals in conflict