Installing the drivers of the tsx pcx 3030 cable – Schneider Electric Communication Drivers User Manual
Page 150
Advertising
TSXPCX3030
150
Installing the drivers of the TSX PCX 3030 cable
At a Glance
The TSX PCX 3030 cable is a USB/RS485 link converter. It enables a device to be
connected to a PLC via the USB port using its terminal port.
The cable is "plug ’n’ play". When you connect the cable via the USB port,
Windows 2000 or XP finds a new device and tries to install the corresponding driver.
It is necessary to install two drivers:
l
the USB bus driver,
l
and the virtual serial port driver.
Advertising