Schneider Electric Communication Drivers - Manual (Page 53)

TSX FPC 10 ISA card
53
2 Answer No to the question Do you want Windows to search for your new
hardware?
Result
The following window appears:
3 Select FPC10 Device from the list then click on Next.
4 Select FPC10 WDM Device from the list then click on Next.
Result
The operating system suggests the hardware parameters that you must adjust
on the card.
Step Action
Add new hardware Assistant
Next> Cancel < Previous:
? ? ?
Select the hardware type you wish to install.
Types of hardware:
Modem
Mouse
Multifunction adapter cards
Network cards
Other peripherals
PCMCIA extension
FPC10 Device
Ports (COM & LPT)
Printer
SCSI Controllers
< Previous:
Add new hardware Assistant
Next> Cancel
Windows can install your hardware using the following parameters:
Warning: your hardware cannot be configured for use with the resources
listed. You may use the Peripherals Manager to adjust the parameters before
restarting your computer. Click successively on the Start, Parameters,
Control panel, System, and Peripherals Manager tabs. To modify the
hardware parameters, consult the hardware documentation supplied.
To continue installing the software needed by your hardware, click Next.
Type of resource Parameter
Input/output range 0190-019F
Interrupt Request (IRQ) 10
Print...