Schneider Electric Communication Drivers - Manual (Page 41)

TSX FPP 20 card
41
Configuration of the Windows 98 operating system
At a Glance After the driver installation and configuration phase, the operating system shall
recognize the TSX FPP 20 card and its driver.
How to configure
the operating
system The following procedure describes how to configure the operating system:
Note: So that the driver loads up when the card is inserted, it is essential that the
station is restarted to allow Windows to update the registry.
Step Action
1 Install and configure the driver.
2 Restart the station.
3 Insert the PCMCIA card into its slot.
Result:
The system automatically detects the card and the following window is
displayed:
4 Select the option Windows default driver.
5 Confirm using the Ok button.
OK
New device detected ?
Cancel Help
Windows default driver
Driver supplied on hardware manufacturer diskette
Telemecanique-TSX SCP 114
Select which driver you want to install for your new hardware
Do not install a driver (Windows will not prompt you again)
Select from list of drivers