Schneider Electric Communication Drivers - Manual (Page 72)

Installation
72
How to install the
driver The ETHWAY driver is installed in accordance with the following procedure:
Step Action
1 Insert the CD-ROM or the first disk.
2 Access the Control Panel in Windows.
3 Launch the Networks icon.
4 Select the Protocols tab and click on Add.
5 In the protocol selection window click on Have Disk...
6 Confirm your choice of diskette or CD-ROM and then choose ETHWAY
Protocol. The driver files are copied onto the PC.
7 Select the Links tab and check the link of the ETHWAY protocol with the
Ethernet card(s) installed on the PC. ETHWAY can be linked selectively to 1 or
2 Ethernet cards.
8 Return to the Protocols tab, select ETHWAY Protocoland click on Properties.
9 Enter the ETHWAY Network-Station address in the Network and Station fields.
If 2 Ethernet cards are installed on the PC, repeat this operation for each entry
in the Adapter name list.
10 Confirm the ETHWAY parameters, the network window, then restart the
machine.