Schneider Electric Communication Drivers - Manual (Page 50)

TSX FPC 10 ISA card
50
Driver configuration screen for Windows 98\2000\XP
At a Glance The configuration tool is used to configure the driver in Fipway or Fipio mode to use
a ISA TSX FPC 10 card.
Illustration The screen dedicated to the card driver looks like this:
Description This table describes the different areas which make up the configuration screen:
Network Parameters
OK Cancel
TSXFPPC10 Configuration
63
Network:
Station:
Network Type
Fipway
Fipio
Fipway (World FIP)
Fipio (WORLD FIP)
Apply
0 1
2
3
Number Element
1 This field is used to set the network address.
2 This field is used to set the station address.
3 This window is used to select the type of Fipway or Fipio connection.