Powerware 5075 kVA - Manual (Page 121)

113 Powerware BPIII Harsh Environment UPS 50--75 kVA Installation and Operatio n
164201261 Rev. F 111503
User-Selected Events
Insert a check at each alarm or notice in the appropriate Group 1 or Group 2 block
to indicate the configuration of your UPS.
INVERTER
MESSAGES --
ALARMS
Group
1
Group
2
INVERTER
MESSAGES --
NOTICES
Group
1
Group
2
Inverter AC Over
Voltage
Inv. Logic Power Failed
Inverter AC Under
Voltage
Bypass AC Over
Voltage
Inverter Calibration
Required
Bypass AC Under
Voltage
Inverter Contactor (K3)
Failed
Bypass is Not Available
Inverter DC Over
Voltage
Bypass Mode
Inverter Failure Bypass Over
Frequency
Inverter Over
Frequency
Bypass Under
Frequency
Inverter Phase Rotation Input Breaker (CB1)
Open
Inverter Setup
Required
Battery Contactor (K2)
Open
Inverter Under
Frequency
Battery DC Under
Voltage
100% Overload
Shutdown
Battery Discharged
125% Overload
Shutdown
Battery Not Charged
Over Temperature
Shutdown
Battery Voltage Low
Shutdown Imminent Phase A Current Limit
Load Off Phase B Current Limit
Bypass Contactor (K4)
Failed
Phase C Current Limit
Bypass Control Failed
Bypass Phase Rotation
Go To Bypass Active
Battery Contactor (K2)
Failed
Battery Ground Fault