Monitoring and controlling ups operation – Powerware 5075 kVA User Manual
Page 53
45
Powerware BPIII Harsh Environment UPS 50--75 kVA Installation and Operatio
n
164201261 Rev. F 111503
Monitoring and Controlling UPS Operation
After you start the UPS, operator intervention is unnecessary except for periodic
checks of the UPS status. Manual operation is required only during routine
maintenance or service. Use the Monitor Panel and the Control Panel to monitor
and control the UPS. Figure 22 shows the location of these two panels on the front
of the UPS.
CONTROL
MONITOR
PANEL
PANEL
Figure 22. Location of the Monitor Panel and the Control Panel
The
Monitor Panel on the left front of the UPS continually indicates the present
mode of UPS operation. This panel contains an LCD screen, backlit status
indicators, and the
EMERGENCY POWER OFF pushbutton. Use the LCD screen
on the Monitor Panel to view performance meters or graphic representations of
UPS operation. The Monitor Panel is described in detail in Chapter 9 ---
Using the
Monitor Panel. A quick reference label describing how to use the Monitor Panel is
located below the Monitor Panel.
The
Control Panel located to the right of the Monitor Panel contains various
controls and switches. These control power to and from the UPS, and allow you to
change the UPS mode manually. The Control Panel is discussed in Chapter 10.