Powerware 5075 kVA - Manual (Page 65)

57 Powerware BPIII Harsh Environment UPS 50--75 kVA Installation and Operatio n
164201261 Rev. F 111503
Select History from the Events menu to display the Event History Log. The Event
History Log lists up to 400 system events in chronological order, with the most
recent event listed last. The end of the log (the most recent events) appears when
you display the screen, and you must scroll upward to view older event listings.
Figure 27 shows the Event History Log screen.
Statistics Graphics Setup
Events
History
Active
Uninterruptible Power System
System Normal
Alarm:
None
Notice: None
Events Meters
04 MAY 1998 14:25:48
Event History Log
Event Description
03
03
03
03
03
03
03
03
16:41:19.3
16:41:20.1
16:41:22.4
16:41:25.5
16:41:26.8
16:41:27.8
16:41:30.4
16:41:29.1
COMMAND: Keyswitch On
STATUS: Auto Mode
COMMAND: Rectifier Commanded On
STATUS:
Inverter On
STATUS: Rectifier On
STATUS: Battery Contactor (K2) Closed
STATUS: Inverter Contactor (3) Closed
STATUS: Bypass Contactor (K4) Open 03
16:41:36.6 STATUS: Inverter Normal
Battery
100%
Percent
Date / Time
May
Figure 27. Event History Log Screen
A small return arrow ( ) appears in the upper right corner of the information area of
the Event History Log screen. This arrow is a reminder that you can press the
pushbutton on the Monitor Panel to toggle the scroll bar between the menu box
and the information area. When the scroll bar is in the information area, the return
arrow is in the menu box. When the scroll bar is in the menu box, the return arrow
is in the information area.
When the scroll bar is in the information area, you can press the and pushbuttons
to scroll through the Event History log.