Nortel Networks DCT1900 - Manual (Page 165)

Technical Product Manual - DCT1900
Installation Instructions, or BDVNB 101 01/3
Install-DCT1900/R8/mw 4-11
© 2000-2005
4.10 Connection of Wrist Strap for ESD
After mounting the Modular Cabinet(s), the installer has to protect against damaging system
boards by ESD. The installer must use a wrist strap which must be connected to the cabinet at the
connector indicated in Figure 4–2 and Figure 4-3.
Note:
The Modular Cabinet must be connected to protective ground.
Fig. 4-9 Example of Interconnecting the System Bus and the Ground Plates
Flat Cable
R-network
R201, R202
and R207
R-network
R401, R402
and R407
R-network installed
R-network removed
Protective Ground Cable