Nortel Networks DCT1900 - Manual (Page 64)

Technical Product Manual - DCT1900
Product Specifications, Portable Telephones
1-4 Specs-DCT1900/R8/mw
© 2000-2005
Receiver Radio Specifications
Receiver sensitivity
: typical -93 dBm and a minimum receiver sensitivity of -90 dBm
with a B.E.R. of .001
Unwanted emissions : as per PWT Standards
User Interface
Ringer volume levels
: 10
Display : Graphic 40 x 121 pixels LCD, backlight
Top indicator : LED (red/green) for status indication
Keypad : 19 hard keys
Volume control : 2 side volume keys
Alarm control : 1 top key
Number memory : approx. 1000 entries
Mute key : 1 side key
Ringer Output
Sound output level
: 85
± 5dB(A) at 10 cm
1.4 9p23 Portable Telephone - Medic - 9p23-BAB4
Same as specifications for the 9p23 Messenger except Medic color is light gray/blue.
1.5 9p23 Portable Telephone (Mark II) - Medic - 9p23-DAB4
Same as specifications for the 9p23 Messenger except Medic color is light gray/blue.
1.6 9p23 Portable Telephone (Mark II) - Messenger - 9p23-CAB4
Same as specifications for the 9p23 Messenger.
1.7 9p23 Programmer Set - 641302
The 9p23 Portable Telephone Programmer Set is required to program/activate the 9p23 Portable
Telephones onto the DCT1900 Standalone RE and to the MS. This Programmer is also used to
load software, custom phone books and PBX function data into Portable Telephones.
1.8 DT620 Programmer Set - NTM 201 2180
The DT620 Portable Telephone Programmer Set is required to program/activate the DT620
Portable Telephone onto the DCT1900 Standalone RE and to the MS. This is also used to
download software, custom phone books and PBX function data into Portable Telephones.