Nortel Networks DCT1900 - Manual (Page 368)

Technical Product Manual - DCT1900
Maintenance, Fault Signalling
3-8 Maint-DCT1900/R8/mw
© 2000-2005
3.8.1 Activating DCA mode
1. Switch off the Portable Telephone :
2. Switch on again with special code: + + (Press the 3 keys simultaneously for
longer than 1 second)
3. The display in Figure 3-2 is momentarily visible. Then the display will change to the normal
standby mode display.
Fig. 3-2 Service Display
4. For 9p23 Portables, while on hook:
-Push the Menu button on the down arrow button
-Scroll up or down until you reach Advanced Config
-Push the Select button
-You see <DCA-Servic>
-Push the Select button
-Scroll down through the following menu items
1. Link Info
2. ALL-FP + RSS
3. FP-Info
4. Channel Inf
5. Time Slots
6. Sys Order
7. Sys List
8. MER tests
9. Last Error
-Press Select to make a menu choice
-Press Back several times to exit the DCA-Services menu
-Turn the portable off when your testing is done
-To use DCA mode while on a call:
- Turn the phone on in DCA mode
- Make the call
- Once a call is established
- Press the down arrow
- You will be at menu option 1-Link Info
- Press Select to choose this option or scroll down the list for the other selection
To terminate the call processing the back button or the off button until you return to the standby
mode display and hang up the call.
ON/
OFF
2 8
ON/
OFF
Line 1: (S/W number)
Line 2: (S/W revision level)