Nortel Networks DCT1900 - Manual (Page 307)

Technical Product Manual - DCT1900
Installation Instructions, Modular Cabinet – Cables
Install-DCT1900/R8/mw 26-3
© 2000-2005
26.4 Power Cable Switch/Fuse – TRENB 101 04
The power cable switch/fuse is a 2–wire 2.5mm
2
cable with two connectors on both sides. It is
used to supply power from the on/off switch to the fuse–holder in the Modular Cabinet. This cable
does not need to be ordered separately. It is factory connected between the switch and the fuse.
Fig. 26–3 Power Cable Switch/Fuse – TRENB 101 04
K2
K3
K4
K1
4 in " .4 in