Nortel Networks NN43001-106 - Manual (Page 140)

140 AC15 Recall: Transfer from Meridian 1
Prompt Response Description
...
EEST NO End-to-End Signaling Tone to originating party.
LD 16 - Define the route accepting recall signal.
Prompt Response Description
REQ NEW CHG New, or Change.
TYPE RDB Route Data Block.
CUST xx Customer number, as defined in LD 15
...
ROUT Route number
0-511 Range for Large System and CS 1000E system.
0-127 Range for Small System, Media Gateway 1000B, and Media
Gateway 1000T.
TKTP TIE Trunk type requires response when REQ = NEW.
...
CNTL YES Changes to controls or timers.
TIMR EESD 0 - (1024)
- 4992 End-to-End Signaling Delay timer. If EESD = 0, the timer is not
started and the buffered digits will not be outpulsed.
...
DLTN YES Dial tone provided by the system to the far end switch.
TRRL YES Recall signal can be received and transmitted on this route.
LD 14 - Define the AC15 trunk.
Prompt Response Description
REQ NEW CHG New, or Change.
TYPE TIE Type of trunk.
...
TN Terminal Number
l s c u Format for Large System and CS 1000E system, where l =
loop, s = shelf, c = card, u = unit.
c u Format for Small System, Media Gateway 1000B, and Media
Gateway 1000T, where c = card and u = unit.
XTRK XFEM Extended Flexible E & M trunk card.
RTMB Route number and Member Number
0-511 1-4000 Range for Large System and CS 1000E system.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.