Nortel Networks NN43001-106 - Manual (Page 405)

405
Automatic Line Selection
Contents
This section contains information on the following topics:
"Feature description" (page 405)
"Operating parameters" (page 406)
"Feature interactions" (page 406)
"Feature packaging" (page 407)
"Feature implementation" (page 407)
"Feature operation" (page 408)
Feature description
Automatic Line Selection allows manual or automatic selection of incoming
and outgoing lines for a given Meridian 1 proprietary telephone on a Class
of Service basis. When a user lifts the handset, the telephone automatically
selects a preferred line according to its priority. The line preferences are as
follows, listed in order of selection priority:
• Manual Line Selection
The user manually selects the DN to be used before going off-hook. Dial
tone is returned if the line is idle. If the line is ringing, the call is answered
and connected to the speaker of the telephone or Handsfree unit.
• Incoming Ringing Line Selection
With Incoming Ringing Line Selection enabled, when the user goes
off-hook, the telephone automatically scans the DN keys (without the
user first manually selecting a DN key). If a line on the telephone is
ringing, it is selected and the call is answered.
• Incoming Non-Ringing Line Selection
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.