Nortel Networks NN43001-106 - Manual (Page 374)

374 Autodial
Call Forward and Busy Status
Party A can use the Busy/Forward Status (BFS) key as an Autodial key to
dial party B.
Call Party Name Display
No name information displays during the programming of Autodial numbers.
Calling Party Privacy
An outgoing trunk call initiated by pressing the Autodial key will carry the
Privacy Indicator if the Calling Party Privacy (CPP) code followed by the
normal dialing sequence is stored against the Autodial key. The CPP code
is counted against the maximum number of digits (currently 23) stored
against the Autodial key.
A user can also store the CPP code against the Autodial key. An outgoing
CPP call can be initiated by pressing the Autodial key, followed by manually
dialing the digits.
An outgoing CPP call can also be initiated by dialing the CPP code, followed
by pressing the Autodial key against which the normal dialing sequence
of digits have been stored.
Charge Account and Calling Party Number
Charge account numbers, including the Charge Account access Special
Prefix (SPRE) code, can be stored as Speed Call or Autodial numbers. All
current limitations of these features apply, such as a maximum of 23 digits
per entry, including the access code. An Autodial number or dialed digits
can follow, but not precede, a Speed Call number. The digits generated by
an Autodial key during feature operation are accepted as Charge Account
digits.
Charge Account, Forced
Forced Charge Account (FCA) numbers (including the Special Prefix [SPRE]
code and the Charge Account access code) can be entered in Speed Call
lists or stored as Autodial numbers. The digits can also be stored, provided
that the account number, regardless of its length, is followed directly by
an octothorpe (#).
China - Flexible Feature Codes - Busy Number Redial
Enhanced Flexible Feature Codes - Busy Number Redial
Activation of Busy Number Redial (BNR) changes the activation of Autodial.
The DN that is autodialed becomes the DN that was busy. When the BNR
activation timer expires or the busy DN is redialed when it is idle, the
autodial capability is deactivated, but the number saved is not cleared. If
Autodial is then activated without entering a DN, the number used is the
formerly busy DN.
Nortel Communication Server 1000
Features and Services - Book 1 of 6 (A to B)
NN43001-106 01.04 Standard
Release 5.0 27 July 2007
Copyright © 2007, Nortel Networks
.